Marathon, WI

How to Lay Landscaping Bricks for Patios and Borders

September 15, 2026
08:09 AM

A well-built brick patio or a crisp garden border can transform an ordinary yard into a space that feels finished and intentional. The good news is that learning to lay landscaping bricks is well within reach for many homeowners, provided you take the time to plan the project and prepare the ground properly. As a team that provides lawn care services in Wausau, WI, we see a lot of hardscape projects, and the ones that last are almost always the ones where the groundwork was done right the first time.

Whether you want a small sitting area off the back door or a clean edge that separates your flower beds from the turf, the fundamentals are the same. In this guide, we will walk through the planning, the tools, the base preparation, and the actual brick placement so you feel confident before the first shovel goes into the ground.

Plan the Layout Before You Dig

Every successful brick project starts with a clear plan. Before you lay landscaping bricks, decide on the exact shape and size of your patio or border and mark it out with stakes and string or a garden hose for curved designs. Measuring the area now saves you from over-buying materials or coming up short partway through the job. A rough sketch with dimensions also helps you estimate how many bricks you will need, plus a little extra for cuts and breakage.

Think about how water moves across your yard, too. A patio should slope away from your home at roughly a quarter inch per foot so rainwater drains instead of pooling. For borders, consider how the edge will interact with your mowing pattern and irrigation. If you already have an underground irrigation system, locate the lines before you dig to avoid an expensive surprise.

Gather the Right Tools and Materials

Having everything on hand keeps the project moving. Most brick jobs call for a similar set of supplies regardless of whether you are building a patio or a simple border. You will typically want the following ready before you begin.

  • Landscaping bricks or pavers plus a few extra for cuts
  • Crushed gravel or paver base for the foundation
  • Coarse sand for the setting layer
  • A shovel, rake, and hand tamper or plate compactor
  • A level, rubber mallet, and a masonry saw or brick splitter for cuts
  • Edging restraints and landscape fabric

Quality materials matter more than most people expect. A durable base and proper edging are what keep bricks from shifting and heaving through Wisconsin's freeze and thaw cycles, so this is not the place to cut corners.

Excavate and Build a Solid Base

The foundation is the single most important part of any brick installation. Dig out the marked area to a depth that accounts for your base, sand, and the thickness of the brick itself. For a border, a shallower trench is fine, but a patio that will hold furniture and foot traffic usually needs several inches of excavation to leave room for four to six inches of compacted gravel.

Once the area is dug out, lay down landscape fabric to discourage weeds and keep your base from mixing with the soil below. Add the gravel in layers, compacting each one with a tamper or plate compactor before adding the next. Skipping compaction is the most common reason patios sink or become uneven over time. After the gravel is firm and level to your intended slope, spread a smooth one-inch layer of sand and screed it flat using a straight board. This sand bed is what lets you set each brick precisely.

Lay Landscaping Bricks the Right Way

With your base ready, you can finally lay landscaping bricks in your chosen pattern. Start from a straight edge or corner and work outward, setting each brick down gently and tapping it into place with a rubber mallet. Keep the joints tight and check your level frequently, both across the surface and along your intended slope. Working off a taut string line helps you keep long runs straight and prevents small errors from compounding across the patio.

Patterns like running bond, herringbone, or basket weave each have their own look and their own cutting demands. Herringbone offers excellent interlock and strength for patios, while a simple soldier course of bricks set on end makes a clean, classic border. When you reach the edges, you will likely need to cut bricks to fit. Measure carefully, mark your cut line, and use a masonry saw or splitter for clean results. Take your time here, because tidy edges are what separate a professional-looking job from a rushed one.

Secure the Edges and Fill the Joints

Loose edges will eventually let your bricks spread apart, so install edging restraints around the perimeter to lock everything in place. Once the border or patio is complete and secured, sweep fine polymeric or joint sand across the surface, working it down into the gaps between bricks. Mist the area lightly if you use polymeric sand so it sets, then sweep off any excess. This final step stabilizes the whole surface and helps keep weeds and ants from taking hold.

Maintaining Your New Brickwork

A brick patio or border is durable, but a little upkeep keeps it looking its best for years. Sweep it regularly, pull any stray weeds that appear in the joints, and top off the joint sand every so often as it settles or washes away. In our climate, freeze and thaw movement is normal, and occasionally re-leveling a brick or two is far easier than it sounds when the base was built correctly.

Pairing hardscape with healthy turf makes the whole yard shine, which is why many homeowners fold brickwork into a broader plan that includes lawn care and landscaping. A crisp brick border looks even better against a thick, well-fed lawn, and the two work together to give your property a polished, cohesive appearance.

When to Call in a Professional

Plenty of homeowners successfully lay landscaping bricks on their own, especially for smaller borders and modest patios. Larger installations, tricky slopes, drainage challenges, or intricate patterns can quickly become more than a weekend project, and mistakes in the base are difficult and costly to fix later. If your vision is bigger than your available time or tools, bringing in a crew is often the more economical choice in the long run.

At Baumann Lawn Care & Landscaping, we help homeowners across Wausau and the surrounding areas plan and build outdoor spaces that hold up to Wisconsin weather. From the first measurement to the final joint sand, careful preparation is what makes brickwork last, and that same attention to detail carries through everything we do with landscaping in Wausau, WI.

If you are ready to add a patio or refresh your garden borders, take it one step at a time and never rush the base. And when you would rather leave the heavy lifting to someone else, feel free to reach out for a free estimate so we can help bring your outdoor project to life.